SIMATIC ET 200MP
Maximum performance and extremely easy usability.
Features & Benefits
- Station configuration with the I/O modules of the SIMATIC S7-1500 in a distributed configuration.
- Low parts variance and uniform front connector for all 35mm-wide modules.
- The pre latch position of front connector enables convenient pre wiring.
- Channel-specific diagnostics allows fast and clear identification of process errors and reduces plant standstills.
- Station can be expanded with up to 30 I/O modules.
- Each module includes up to 32 channels.
- Clear arrangement using one-to-one assignment of module and diagnostic LEDs to terminal and label.
- “Expandable cable storage space” ensures uniform station appearance in the control cabinet.
- PROFINET IRT for isochronous mode with clock rates up to 250 μs.
- High-performance backplane bus of the SIMATIC ET 200MP enables fast response times.
- Integrated shielding design enhances station resistance against external EMC interference.
- Digital input modules with very short input delay of 50 μs.
- Analog modules with conversion time of 62,5µs rsp. 125 µs for 8 channels.
Type
Name
Downloads
SIMATIC ET 200 – The I/O system for both inside and outside the control cabinet brochure
SIMATIC ET 200 – The I/O system for both inside and outside the control cabinet brochure
Increase productivity with the ultimate power – Advanced Controllers SIMATIC S7-1500 with ET 200MP brochure
Catalog ST 70 – Products for Totally Integrated Automation
Chapter I/O Systems inside ST 70 Data Sheet
SIMATIC ET 200SP
The powerful IO system for compact control cabinets.
Features & Benefits
- Free choice of the PROFINET connection technology via bus adapter.
- No tools needed for wiring due to push-in technology.
- Improved accessibility of the wiring thanks to a new arrangement of the spring NC contacts and the associated conductor opening.
- Extremely clear arrangement thanks to colored labels and reference labeling plates and labeling strips.
- Channel-specific diagnostic functions.
- Expandability of the station to 64 modules.
- Space savings in the control cabinet.
- Compact dimensions, suitable for 80 mm standard control boxes.
- Fast communication via PROFINET.
- Modules and terminal boxes can be replaced while system is running (“hot swapping”).
- Uniform shielding concept, from the conductor, terminal box and back plane bus to the PROFINET cable.
- Greater energy efficiency thanks to system-integrated PROFIenergy.
- AS-Interface.
- Configuration control via software.
- Fast communication via PROFINET with isochronous backplane bus as standard.
- PROFIBUS, the proven fieldbus standard as an alternative.
- With AS-Interface, sensors and actuators of the lowest field level can be easily and quickly interlocked and connected to the SIMATIC ET 200SP.
- IO-Link ensures a uniform connection of switching devices, sensors or RFID devices to the control level via a cost-effective point-to-point connection.
Type
Name
Downloads
SIMATIC ET 200 – The I/O system for both inside and outside the control cabinet brochure
SIMATIC ET 200 in IP67 “Think outside the box!” – with flexible solutions outside the control cabinet Brochure
Catalog ST 70 – Products for Totally Integrated Automation
Chapter I/O Systems inside ST 70 Data Sheet
SIMATIC ET 200SP HA
The variant for use with SIMATIC 7.
Features & Benefits
- The new terminal block layout and the push-in technology make tool-free wiring possible.
- Higher flexibility during the installation in the control cabinet is possible due to the separation of mechanical and elec tronical components, allowing the station to be prewired without I / O modules.
- Slot covers can be inserted on the integrated terminal blocks, which can be replaced at any time.
- Plant downtime considerably reduces the economic efficiency of process plants
- Redundant, flexible components significantly increase the availability of the plant. In addition to operating the SIMATIC ET 200SP HA station redundantly via the PROFINET interface, there is also the possibility of a redundant set up of the I / O modules.
- The compact size with up to 56 peripheral modules per station and the high channel density of up to 32 channels on a 22.5 mm wide module reduces the space requirement in the control cabinet to a minimum.
- Ready for the field: For installation in hazardous areas up to zone 2, Extended temperature range: -40 to + 70 ° C, Enhanced interference immunity according to NAMUR recommendation NE21, Conformal coating of all components and can be used up to an altitude of 4 000 meters.
- Capacity limit: max I/O modules of 56 & max address space of 1440 bytes.
SIMATIC ET 200M
I/O station for high density channel applications with S7-300.
Features & Benefits
- Modular I/O system with IP20 degree of protection, particularly suitable for user-specific and complex automation tasks.
- Consists of a PROFIBUS DP or PROFINET interface module IM 153, up to 8 or 12 I/O modules of the S7-300 automation system (structure with bus connection or with active bus modules), and a power supply if applicable.
- Can be expanded with S7-300 automation system signal, communication and function modules.
- Applicable Ex analog input or output modules with HART optimize the ET 200M for use in process engineering.
- Can be used in redundant systems (S7-400H, S7-400F/FH).
- Modules can be replaced during operation (hot swapping) with the bus modules active.
- Transmission rates up to 12 Mbps.
- Ex approval to Cat. 3 for Zone 2 acc. to ATEX 100 a.
- Fail-safe digital in/outputs as well as analog inputs for safety-oriented signal processing in accordance with PROFIsafe.
- Supports modules with expanded user data, e.g. HART modules with HART minor variables.
SIMATIC ET 200iSP
The proven intrinsically safe IO system for hazardous areas.
Features & Benefits
- Terminal modules: mounted on an S7‑300 rail; for connecting power supply, interface, electronics, watchdog and reserve modules and for prewiring, with blue screw-type or spring-loaded terminals for hazardous environments or with black screw-type terminals for non-hazardous environments.
- Power supply unit: 1 or 2 (redundant) power supply modules PS with pressurized enclosure for feeding 24 V DC or 120/230 V AC.
- Interface module: 1 or 2 (redundant) IM 152 interface modules for connecting the station to the PROFIBUS DP.
- Electronics modules (2/4/8 channels): Up to 32 in any combination; Digital electronics modules (DI, DO); Analog electronics modules (AI, AO); Safety-related electronics modules (F-DI, F-DO and F-AI) or Watchdog module.
- Accessories: Reserve module for reserving a slot for any electronics module; Terminating module (included in scope of delivery of terminal modules for the PROFIBUS interface); Labeling sheets with printable labeling strips & Inscription labels for slot numbering.